- Home Checkout
| More

L&L eQuad Pro EQ2327 Kiln
Discover the L&L eQuad Pro EQ2327 Today for Creative Fired Projects

L&L eQuad Pro EQ2327 Kiln
**This is a photo of the eQ2827-3 which is 28" diameter rather than 23-3/8" diameter.

L&L eQuad Pro EQ2327 Kiln

Retail $4650.00
Our Price $3720.00


Shelf Kit :
Vent-Sure Control:
Power :
Zone Control:

Rolling Kiln Stand:




Click Here for Support Videos on L&L Kiln   

Optional Shelf Kit Shown
Optional Shelf Kit Shown

Optional Shelf Kit Includes: Two 20" Full Round Shelves and Four 20" Half Round Shelves (3/4" thick), Six each of 1/2", 1", 2", 4", 6", & 8" high 1-1/2" Square Ceramic Posts, Heat Resistant Gloves and 1 pound of Cone 10 Kiln Wash

The eQuad-Pro Series Kilns were designed specifically to handle the rigorous demands of production firing. Utilizing a combination of L&L’s time proven technology, such as element holders, ceramic terminal boards, and thermocouple protection tubes, along with the new advancements of the super heavy-duty quad element holder and element design, this kiln series provides what is sure to be the preferred “workhorse” for any production studio.

L&L Ceramic Element Holders DynaTrol Digital Kiln Controller Inside of the eQuad Pro Kiln
L&L Ceramic Element Holders
L&L Kiln's patented hard ceramic element holders protect your kiln. The ceramic element holder protects the soft fragile firebrick. Replacing elements repeatedly does not damage the brick. Elements don't sag or fall out of broken grooves. You do not need metal pins to hold elements into broken grooves. Customers often say their L&L kilns look new after 30 years of hard use!
DynaTrol  Digital
 The DynaTrol features Dynamic Zone Control. It is like having three controls in one. The DynaTrol separately measures temperatures in the bottom, middle and top of the kiln and automatically adjusts the heat output of three separate heating zones even as the kiln is heating up. Kiln temperatures are automatically evened out to within 1/2 cone or better top to bottom. There is no manual intervention with input switches. There are separate thermocouples (heat sensors) and contactors (power controls) for each of the three zones. You have the ability to adjust the "lag" or differential between zones, (anywhere from 5 degrees to 99 degrees).
eQuad Series Info
Super heavy-duty, thick elements with 4 wraps per 9" high section. All eQuad Pro Models feature L&L's ceramic element holder

Vent-Sure ControlOptional Vent-Sure Control

The vent control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol or Genesis.

Genesis Controller

Optional Genesis Touch-screen Controller

Features: touch-screen for the user interface, easy-to-follow instructions, different user interface levels that can be set to match the user's firing knowledge, graphical display of the firing process, continuing use of decades of Bartlett expertise on kiln control.

Rolling Kiln Stand

Rolling Kiln Stand

L&L's rolling kiln stand features heavy gauge (14 ga) galvannealed steel construction with multiple bends for extra strength, steel swivel locking casters, integrated vent collection box support, and guide rails for the kiln. Each size is fitted to the kiln. Important special caution plates are riveted to three sides of the stand. The vent collection box is not included but, when you order a Vent-Sure vent system the longer duct is included with the system.

Additional Features
  • Temperature Rating: Cone 10, 2350 F, 1290 C

  • Loading: Lid position, when open, rests at an angle away from the kiln without lid supports so that the loading is easy and unobstructed.

  • Hinge: Spring loaded for "feather-lite" easy opening.

  • Stand: Heavy-duty 14 gauge full solid stand with multiple bends for strength. Bolt
    on legs. Feet protectors included.

  • Assembly: Three to four 9" high sections stack on top of each other. Easy to
    assemble. Bottom is reversible.

  • Construction: Stainless steel wrapped around brick with 3 clamps on each section.

  • All stainless screws.

  • Insulation: 3" K23 firebrick.

  • Brick Coating: Reflective coating protects brick and reduces dusting.

  • Element Holders: Hard ceramic element holders protect brick.

  • Quad Element Design: Super heavy-duty, thick elements with 4 wraps per 9" high

  • Element Connections: Proprietary all-ceramic element connection block makes
    changing elements easy.

  • Control Panel: All controls and components are mounted in a separate control
    panel that is piggy-backed to the element connection box. This separation helps
    keep the controls cool. The control panel and element box are hinged for easy
    access and maintenance. Control box can be easily removed for servicing. On/off
    switch and control fuse are included.

  • Control: DynaTrol with 4 Easy-Fire programs, 6 Vary-Fire programs, PreHeat,
    Delay, Program & Segment Review, and Diagnostics. Two programs can be
    combined for one 16 segment program.

  • Zone Control: Three zones with three separate thermocouples.
    Thermocouples: Type K 8 gauge with ceramic protection tubes.

  • Relays: Mercury free relays.

  • Peephole Plugs: Non-fragile solid ceramic with heat-locked head. 1" diameter fullview
    non-tapered. One per section.

  • Warranty: Limited 3 year warranty.

  • UL Listing: Pending

Inside Diameter 3"

22 3/8"

Chamber Height


Cubic Feet

 6.7 cu ft (3")

Max Cone-Temp.

 2350 F

Shipping Weight

345 lbs

Voltage 240/208
Phase Single/Three
Controller 12 Key Digital
Amps 62.3
Watts 13440
Breaker Size 70 amp
*cord not supplied
Shipping Info

Clay-King Proudly Ships Via
 Freight Shipping Required on This Item

Please Review the Delivery Checklist Before You Order!

Contact Help and Links Shipping Terms Master Index