L&L Doll Kiln
Buy the L&L Doll Kiln Today for Small Glass and PMC
Projects
|

L&L Doll Kiln shown with 4 Key Digital
|

L&L Doll Kiln
Retail $1275.00
Our Price
$1090.00
Delivered!

Optional Shelf Kit Includes:
Includes two full 9" diameter ceramic shelves and
four each of 1/2", 1", 1-1/2", 2", 3", and 4" high triangular
posts. |

 |

Standard 4 Key Digital
The new One-Touch™
Intuitive Kiln Control was designed for busy school teachers,
contemporary studios, and hobbyists. One touch and you are ready to fire
the bisque and glaze programs. No programming is necessary, simple
adjustments are easy, yet sophisticated programming is possible. |
The Doll-Baby kilns are meant for small
ceramic work such as dolls, for testing glazes without firing a
large load, and for other laboratory and home uses. It is available
in either manual or automatic versions and in either 15 amp (Cone 5)
or 18 amp (Cone 10) versions.
|
Options |
 |
 |
 |
L&L Ceramic Element Holders
L&L Kiln's patented hard
ceramic element holders protect your kiln. The ceramic element
holder protects the soft fragile firebrick. Replacing elements
repeatedly does not damage the brick. Elements don't sag or fall
out of broken grooves. You do not need metal pins to hold
elements into broken grooves. Customers often say their L&L
kilns look new after 30 years of hard use!
|
DynaTrol Digital
The DynaTrol features
Dynamic Zone Control. It is like having three controls in one. The
DynaTrol separately measures temperatures in the bottom, middle and top
of the kiln and automatically adjusts the heat output of three separate
heating zones even as the kiln is heating up. Kiln temperatures are
automatically evened out to within 1/2 cone or better top to bottom.
There is no manual intervention with input switches. There are separate
thermocouples (heat sensors) and contactors (power controls) for each of
the three zones. You have the ability to adjust the “lag” or
differential between zones, (anywhere from 5 degrees to 99 degrees). |
Proprietary Reflective Ceramic
Coating
L&L coats the
firebrick with a proprietary reflective ceramic coating which
penetrates, binds and hardens the surface of the entire interior
of the kiln. This will reduce brick dusting, makes the kiln
interior more durable and helps improve energy efficiency. |
|
|
Additional Features |
-
DYNA GLOW ELEMENT HOLDERS -
THREE SEPARATE ELEMENTS -
6 FOOT POWER CORD - 20 AMP 5-20P -
1" DIAMETER PEEPHOLE -
* Allows you to see a wide area inside
kiln. -
* Heavy-Duty Insulated plug included.
The peephole plug is cast from solid ceramic and includes a heat
lock at the head. -
STAINLESS STEEL CASE AND STAINLESS
SCREWS -
GALVANNEALED STAND WITH FULL SUPPORT -
* Protected from corrosion. Includes
caps on feet to allow easy moving on floor. -
* The stand is made like the Jupiter
kiln stands except that there is no provision for a vent. Reflective
surface of stand aids energy efficiency. -
DOOR CLIPS -
TWO HANDLES -
BRICK HARDENED WITH SPECIAL FACING -
ONE-TOUCH CONTROL
* Proprietary One-Touch™ Intuitive Kiln Control is designed for busy
school teachers - One touch and you are ready to fire the bisque and
glaze programs typically used in schools (also easy to adjust simple
parameters like cone, delay, hold, heat-up and cool-down rates). You
can even create four custom ramp/hold programs. -
OPTIONAL DYNATROL PROGRAM CONTROL
* The control is programmed to be a single zone control. Includes one
8 gauge thermocouple.
* Industrial Thermocouple Protection Tube
|
Specifications |
|
|
|
Chamber Diameter |
11" |
Chamber Height |
9" |
Cubic Feet |
.5 cu ft |
Shipping Weight
|
110 lbs |
Voltage |
120/240 |
Controller |
3 Key Digital/ DynaTrol |
Amps |
15/18 |
Watts |
2160 |
Breaker Size |
20 amp |
Plug Type |
5-15P (120v)
6-20P (240v) |
|
Shipping Info |
Clay-King Proudly Ships Via

Please Review the
Delivery Checklist
Before You Order!
|