Gleco Trap

Buy the Gleco Trap Today for All of Your Drain Trap Needs

The Gleco Trap

The Gleco Trap provides you with an economical plumbing trap that is easily installed and maintained. The Gleco Trap is connected below the sink and collects solids in a bottle, which has a fill line. When the solids reach the fill line, the trap is drained through a valve, the bottle is exchanged with a replacement bottle, the valve shut and the trap is back in service. Bottle exchange is rapid and done without the need of tools (less than 2 minutes!). Most of all, there is no mess and less chance of water spillage.

Retail $100.00
Our Price $86.88

Click Here for Easy Installation Instructions

Replacement Bottles for the Gleco Trap


Case of six 19 ounce replacement bottles for Gleco Trap Case of 6 - 19 ounce replacement bottles for the Gleco Trap	Case of 12 - 32 ounce replacement bottles for the Gleco Trap Case of 12 - 32 ounce replacement bottles for the Gleco Trap	Case of 6 - 43 ounce replacement bottles for the Gleco Trap Case of 6 - 43 ounce replacement bottles for the Gleco Trap
$31.50	$33.50	$33.50

Industrial Gleco Traps


Case of six 64 ounce replacement bottles for Gleco Trap Case of 6 - 64 ounce replacement bottles for the Gleco Trap	Gleco HV 3.5 Gallon Sink Trap From the inventor of the original Gleco Trap, the Gleco Trap HV Sanitary High-Volume Plaster Trap brings the same clean, dry and simple maintenance to full-size plaster traps. Never again will you soak your cabinets and yourself with foul-smelling, contaminated wastewater when you change your plaster trap container	Gleco HV 5 Gallon Sink Trap From the inventor of the original Gleco Trap, the Gleco Trap HV Sanitary High-Volume Plaster Trap brings the same clean, dry and simple maintenance to full-size plaster traps. Never again will you soak your cabinets and yourself with foul-smelling, contaminated wastewater when you change your plaster trap container
$33.50	$80.00	$80.00

Actual Measurements:

Bottles only without lid, from top of threads to bottom (some are slightly rounded up to nearest discernable quarter inch)

19 ounce - 4"
32 ounce - 6-1/2"
43 ounce - 5"
64 ounce - 7-1/4"
128 ounce - 9-3/4"

5" = widest diameter of 64 ounce bottle

5-1/2" = Height of Gleco Trap without bottle installed from top of the threads that attach to the sink pipe to the bottom of the trap.

12-1/2" = Physical height of GT 64 (with bottle installed) from top of the threads that attach to the sink pipe to the bottom of the bottle. The top of the threads to the drain pipe are slightly lower.

10-1/2" = width of the Gleco Trap from the outer edge of the sink pipe to the outer edge of the valve stem (left to right, as it appears in photos). This width is constant, regardless of bottle attached.

NOTE: Keep in mind that the bottles will need to unscrew from the Gleco.

Click Here for Easy Installation Instructions