Evenheat HF 2918 Ceramic Kiln

Kiln Overview

Features

Top Load

The HF 2918 is a top loading design and offers a chamber 29″ diameter x 18 deep. The 18″ deep chamber makes it wonderfully easy to load and unload. The rim of the chamber is 29″ from the floor which is waist height or lower. You’ll love it.

Lid Lift Assist

To assist in opening and closing we have equipped the HF 2918 with our patented Dyna-Lift lid lift assist.​

The Dyna-Lift lightens the force needed to operate the kiln lid by attaching and lifting at a single point, the lid handle. The lift assist is not attached to the kiln chamber at all. All heavy lifting forces are directed entirely to the kiln stand and not the kiln itself. It’s a wonderful design that places no lifting forces onto the chamber which would only weaken it.

The Dyna-Lift Lid Lift Assist is the best designed, best performing lift assist available.

Multi-Zone Control

The HF 2918 is designed with multi-zone control. Multi-Zone control means the kiln uses more than one thermocouple (temperature sensor) to control the heat in the firing chamber.

The kiln chamber is divided into heat zones, each with its own thermocouple. Each zone temperature is controlled very precisely. The end result is a very even temperature distribution from top to bottom.

2 Position Lid Vent

The HF 2918 is equipped with a 2 position lid vent. Perfect for speeding up the cooling process.

Swing View Equipped

The HF 2918 temperature controls are fitted to our Swing View Adjustable Enclosure.
 
The swing view is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle. Once you’re done, lay it back down to see it from across your studio. It’s that simple.
 
The swing view pairs well with touchscreen controls like the TAP I and Icon+ as viewing angle can be perfectly aligned. You’ll love it.

3″ Firebrick with No Loss of Chamber Volume

Historically kiln designs were based on 2-1/2″ firebrick. As 3″ firebrick began to show favor in high temperature designs many kiln manufacturers simply reduced the firing chamber size to accommodate the thicker firebrick while leaving the outside dimensions the same.

At Evenheat we took a different direction. Instead of making the chamber smaller we kept it the same while increasing the outside dimensions. In this way there is no loss in chamber volume and common, standard kiln furniture would continue to fit. Nice.

Swing-Away Peephole Covers

Our kiln designs feature swing-away peephole covers as opposed to plugs.
 
Plugs get lost and they get broken. Our attached peephole covers remain on the kiln and simply swing open and closed. You won’t lose them and they certainly won’t break.

Lid Prop

The HF 2918 is provided with lid prop bars that positively keeps the lid in the open position. Simple operation is made even easier with our well designed lid handle.

Relay Access Port

The HF 2918  incorporates our Relay Access Port for simple, no-panel-off relay replacement.

​Simply remove the access plate to gain access to the mechanical relays. There’s no need to remove the control panel and dig into the internal wiring. It’s absolutely simple and effective and all it takes is a screwdriver!

​It’s a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.

Full Stainless Steel Jackets

Multi-section, multi-jacketed kilns were conceived to lower production costs for the kiln manufacturer and to make life easier for the person installing the kiln. These are worthy goals but they come at the cost of kiln quality. It’s a trade off we’re not willing to make.

We build our kilns with full stainless jackets from top to bottom. Full stainless jackets mean absolutely solid, life extending construction. There are no leaks, no shifting and no weakness. Insist on Full Stainless Jackets for true build quality.

Available in 200V, 208V, 220V and 230V by request

Available in 3 phase Delta and Wye (380V, 400V, 415V) by request

Operates properly on both 50Hz and 60Hz

​Consult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as “continuous use”. Continuous use is defined as continuous, full power on for 3+ hours.

​Weight: 320lb. (144Kg) – Approx.

​Shipping Method: Freight Truck

​NRTL Listing Agency – TUV Listed United States and Canada – Designed and Tested to CSA & U/L 499

​California Prop 65
HF 2918 models may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Shop Pottery Kilns

From large-scale pottery kilns for production studios to kilns for your home, Clay-King has you covered!

We know that professional pottery kilns are a significant investment toward your artistic goals, so we’re here to help! Our customer service team can help you find the best kiln for your specific needs and can offer tips to better maintain your kiln throughout the years.

If it’s your first time purchasing a production-grade pottery kiln, we can help you get started by finding the right voltage, fuel type, chamber capacity, loading type, and more. We carry pottery kilns from top manufacturers including Skutt, Olympic Kilns, L&L, Evenheat, and Amaco. Our warehouse is stocked with small, medium, and large kilns to fit the needs of any pottery studio.

Why Choose Clay-King for Kilns?

When you shop with Clay-King, you’re choosing a company that stands behind our kilns, clay, and products. You can rely on our team to provide unbeatable customer service and help you succeed.

Massive Kilns Inventory

Clay-King is a leading supplier of pottery kilns and ceramic pottery products. Our warehouse is always stocked with pottery kilns of various sizes, fuel types, and brands. You can also find other kiln accessories you’ll need for your project.

Fast Shipping on Kilns

Thanks to Clay-King’s in-house warehouse department, we can ship your pottery kiln fast! You can expect speedy delivery and expert packing, so your pottery kiln arrives in the best condition possible.

Incredible Customer Service

Our experienced potters and customer service team supports you every step of the way. Whether it’s a question about setting up your pottery kiln or you’re seeking recommendations for your next clay project, the Clay-King experts are here to help!