 |
|
|
|
|
 |
|
|||
 |
 |
|||
|
|
|
Quality wooden pottery ribs, made it St Louis MO. These throwing tools are designed and crafted by a small team of makers. Unless otherwise noted, they are made of cherry heartwood or hard maple - woods chosen for their strength stability and ability to hold up against moisture. |
|
|
|
NEW! Rib Rub by Garrity Tools
Rib Rub is the perfect salve for your tools and hands. Formulated with all-natural ingredients, you can rub it directly into your tools to help condition the wood and make them last even longer. Then, rub any excess into your hands to moisturize your skin! |
|
Mushroom Anvil
Useful in handbuilding paired with a paddle, use it to make slab bowls on foam. |
|
|
NEW Compass Tool
The smart design of the new Garrity Compass Tool allows you to cut 14
different sizes of circles. With this compact multi-functional tool, you can
cut or scribe circles ranging from 1 inch to 7 inches in diameter. You just
need two needle tools (or any equivalent) to use the Compass Tool on a slab
of clay. When you’re not hand-building on your bench, the pointed tip, flat
sides, and rounded end come in handy while throwing on the wheel. Our Price $12.00 |
|
|
New! Paddle
Solid, but not too heavy, our Paddle is the perfect tool for shaping
and sculpting clay by hand. With a nice swing and a great handle to grip,
the paddle tool will help you create subtle or exaggerated forms. Our Price $28.00 |
|
|
A-4
With A4, you can shape or clean up the inside of a bowl or vessel, and without switching tools, clean up the rim as well. Our Price $8.00 |
|
|
B-3
B3 offers several lines, curves and angles, and is great for building vases and custom shapes. Our Price $10.00 |
|
|
C-1
A circle tool as one continuous, consistent curve. you dont have to worry about the tool shifting while you use it, and you know exactly what your getting when you reach for it, no need to waste time making sure you're using the right profile on the tool. Our Price $8.00 |
|
|
C-3
A consistent 3" curve, great for shaping the inside of a bowl or a concave profile on a vessel. Our Price $8.00 |
|
|
C-4
A classic useful circle shape, 4" across Our Price $10.00 |
|
|
K-1
The Kidney shape is a classic pottery tool, K1 is the larger of our 2 kidneys, but it's still only 3" long Our Price $10.00 |
|
|
N-1 Knife/Rib
7.5" long x 2" wide Our Price $10.00 |
|
|
N-3
Good for the potters who like clean angles, plumb walls, sips on plates, and good sharp tools. Our Price $8.00 |
|
|
R-1
One of those tools that you always need at hand. comfortable in your hand, useful on almost any project. Our Price $10.00 |
|
|
S-2
The small spaceship. Our Price $8.00 |
|
|
S-6
The spaceship. Our Price $10.00 |
|
|
T-1
Our versatile Knife! easy to hold, hyper-useful, and easy to resharpen with a small piece of sandpaper if you drop it on its point. Our Price $10.00 |
|
|
T-2
T2 is Garrity's most original shape. let your imagination go wild. like many good tools, we're hoping T2 will help you expand your technics and collection. Our Price $10.00 |
|
|
T-5
A classic shape. you've all used them before. This is our take. Our Price $8.00 |
|
|
T-6
There are a lot of great uses for this throwing rib, but let's face it, you can't replace the importance of a perfectly strait, 8" long side, especially when it's on a right angle. when you need this tool, nothing else will do. Our Price $12.00 |
|
|
Fishstick
About 1.5" x 5" long
and 1/4" thick, this tool is perfect for smoothing out walls with 4 different corner profiles and flat ends to help you compress the bottom of piece you've already made and clean up the inside corners. Our Price $8.00 |
|
|
Foot 2
It's a footing tool about 4" long. Our Price $10.00 |
|
|
Foot 4
It's a footing tool about 4" long. Our Price $10.00 |
|
|
Foot 5
It's a footing tool about 6" long. Our Price $10.00 |
|
|
Foot 6
It's a footing tool about 5.5" long. Our Price $10.00 |
|
|
Foot 8
It's a footing tool about 4.5" long. Our Price $10.00 |
|
|
Unfoot
Everyone is familiar with footing tools, well this is just like that, but for people who want the opposite: a little break where the foot would be. Our Price $12.00 |
|
|
Unfoot 2
Everyone is familiar with footing tools, well this is just like that, but for people who want the opposite: a little break where the foot would be.new design for rounded work! Our Price $12.00 |
|
|
New! Texture Comb
The sturdy handle and consistent teeth of our Texture Comb make it
great for scoring or adding texture lines to the surface of any
project.size: 3.25" long x 1.75" wide Our Price $12.00 |
|
|
Texture 1
3.2" x 3.2" with four unique textures. Our Price $10.00 |
|
|
Texture 2
3.2" x 3.2" with four unique textures. Our Price $10.00 |
|
|
Texture 3
3.2" x 3.2" with four unique textures. Our Price $10.00 |
|
|
Texture 4
3.2" x 3.2" with four unique textures. Our Price $10.00 |
|
|
Texture 5
8.5" long x 1.5" wide, great texture ends on both sides. Our Price $10.00 |
|
|
Texture 6
3.5" x 3.1" with four unique textures. Our Price $10.00 |
|
|
Texture 7
3.3" x 3.3" with four unique textures. Our Price $10.00 |
|
|
Texture 8
3.75" x 2.75" with four unique textures. Our Price $10.00 |
|
|
Texture Micro
Roughly 3.5" x 3.5" with four unique textures. Our Price $10.00 |
|
|
Thumb Tool
7" long x 1.25" wide with a scoop on one end. Great for saving your thumb
when pressing slab seams and also great for sculpting. Our Price $10.00 |
