L&L JD18X Kiln
Discover the
L&L JD18X Today for Creative Fired Projects
|

A JD18X is shown with three sections
|

L&L JD18X Kiln
Retail $3100.00
Our Price $2635.00
Delivered
 |

 |

Optional Shelf Kit Shown
Optional Shelf Kit Includes: Shelves are 15-1/2"
diameter full and half round cordierite shelves. Each post kit includes
six each 1/2", 1", 2" 4", 6" and 8" high 1-1/2" square cordierite posts.
All furniture kits include heat-resistant gloves and 5 pounds of cone 10
kiln wash. |
The L&L Jupiter series are highly
customizable with tall heights possible. They are easy to stack and
disassemble because of the plug in sections. This makes for a perfect
kiln for people who need a kiln that can grow or shrink depending on
the situation. The Jupiter series feature one thermocouple per
removable section to ensure the most accurate firings with no hot or
cold spots.
|
Features |
 |
 |
 |
L&L Ceramic Element Holders
L&L Kiln's patented hard
ceramic element holders protect your kiln. The ceramic element
holder protects the soft fragile firebrick. Replacing elements
repeatedly does not damage the brick. Elements don't sag or fall
out of broken grooves. You do not need metal pins to hold elements
into broken grooves. Customers often say their L&L kilns look new
after 30 years of hard use!
|
DynaTrol Digital
The DynaTrol features
Dynamic Zone Control. It is like having three controls in one. The
DynaTrol separately measures temperatures in the bottom, middle and top
of the kiln and automatically adjusts the heat output of three separate
heating zones even as the kiln is heating up. Kiln temperatures are
automatically evened out to within 1/2 cone or better top to bottom.
There is no manual intervention with input switches. There are separate
thermocouples (heat sensors) and contactors (power controls) for each of
the three zones. You have the ability to adjust the "lag" or
differential between zones, (anywhere from 5 degrees to 99 degrees). |
Proprietary Reflective Ceramic
Coating
L&L coats the
firebrick with a proprietary reflective ceramic coating which
penetrates, binds and hardens the surface of the entire interior
of the kiln. This will reduce brick dusting, makes the kiln
interior more durable and helps improve energy efficiency. |
|
Optional Vent-Sure Control
The vent control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the
outputs from the DynaTrol or Genesis.
|
Optional Genesis Touch-screen Controller
Features: touch-screen for the user interface, easy-to-follow instructions, different user interface levels that can be set to match the user's firing knowledge, graphical display of the firing process, continuing use of decades of Bartlett expertise on kiln control.
|
Rolling Kiln Stand
L&L's rolling kiln stand features heavy gauge (14 ga) galvannealed steel construction with multiple bends for extra strength, steel swivel locking casters, integrated vent collection box support, and guide rails for the kiln. Each size is fitted to the kiln.
Important special caution plates are riveted to three sides of the stand.
The vent collection box is not included but, when you order a Vent-Sure vent system the longer duct is included with the system.
|
Additional Features |
-
Temperature Rating: Cone
10, 2350°F, 1290°C -
Loading: Lid position,
when open, rests at an angle away from the kiln without lid -
supports so that loading
is easy. Chains are used to secure the lid in place when open. -
Hinge: The hinge of the
JD18X00 series is not spring-loaded. -
Stand: Heavy-duty 14 gauge
full solid stand with multiple bends for strength. Bolt on legs. -
Feet protectors included. -
Assembly: Two to three 9"
high sections stack on top of each other. Easy to assemble. -
Bottom is reversible. -
Construction: Stainless
steel wrapped around brick with 3 clamps on each section. All
stainless screws. -
Insulation: 2-1/2" K23
firebrick. -
Brick Coating: Reflective
coating protects brick and reduces dusting. -
Element Holders: Hard
ceramic element holders protect brick. -
Elements: Heavy-duty. 2
elements per 9" high section. Wired in series. -
Element Connections:
Proprietary all-ceramic element connection block makes
changing elements easy. -
Control Panel: All
controls and components are mounted in a separate control panel
that mounts to the element connection boxes. Cords from sections plug
into this
panel. The control panel is hinged for easy access and maintenance.
Control box can
be easily removed for servicing. On/off switch and control fuse are
included. -
Control: DynaTrol with 4
Easy-Fire programs, 6 Vary-Fire programs, PreHeat,
Delay, Program & Segment Review, and Diagnostics. -
Zone Control: Two or three
zones with separate thermocouples. -
Peephole Plugs:
Non-fragile solid ceramic with heat-locked head. 1" diameter fullview
non-tapered. One per section. -
Thermocouples: Type K 8
gauge with ceramic protection tubes. -
Relays: Mercury free
relays.
|
Specifications |
|
|
|
Inside Diameter 2.5" |
17.5" |
Inside Diameter 3" |
16.5" |
Chamber Height |
27" |
Cubic Feet |
3.9 cu ft
(2.5")/ 3.7 cu ft (3") |
Max Cone-Temp. |
2350 F |
Shipping Weight
|
245 lbs |
Voltage |
240/208 |
Phase |
Single/Three |
Controller |
12 Key Digital |
Amps |
34.5 |
Watts |
8300 |
Breaker Size |
50 amp |
Plug Type |
NEMA 6-50
 |
|
Shipping Info |
Clay-King
Proudly Ships Via

Please Review the
Delivery Checklist
Before You Order!
|