 |
|
|
|
|
 |
|
|||
 |
 |
|||
Kemper Tools |
|
 |
|
|
|
Hi-Temp Wire For use during kiln firing--
stays strong in extreme heat over long periods of time. A great general
purpose support wire. Hi-Temp Stamen Wire For use with kiln firing, stamen
wire is designed to be used for decoration, jewelry, and armatures. Cone
5 Max Temp |
 |
CTK7
Ceramic Tool Kit - 7 Piece
|
 |
PTK 8-pc
Tool Kit
This standard tool kit is just what you need to get started throwing on the wheel-- two ribs, two trimming tools, a sponge, wire tool, needle tool and a wooden knife are included. |
 |
MRS Mini Ribbon Sculpting Set
These tools ar eused for fine sculpting, detailing and trimming clay, plaster, wax, or any other modeling medium. Set of 6. Approx. 5.5" long |
 |
Element Staples 12 pack
Hold loose kiln elements in place with these easy to insert, sharp-ended staples. These 1.5" pins are of a heat resistant alloy for temperatures to 2500° F (Cone 13). 12 per package. |
|
|
Square Hole Cutters Ideal for cutting out windows, these cutters are designed with push out plungers to remove clay from the tube. |
|
Hole Cutter Punches The tubes have spring loaded aluminum rods which eject the clay. |
|
|
|
HC4 Round Hole Cutter 7/8"
|
|
|
K46 Leaf Cutter Set Made of rust-free material, these cutters have plungers to push clay out and range from approximately 1" to 2" in length. Set of 4. |
|
K50 Rose Cutter Set These cutters are made from rust-free materials, have ejection plungers, and are different sizes ranging from ½" to 1½" diameter. Set of 5. |
|
||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||
|
|
Texture Ribs Measure approximately 3¼" long x 1-5/8" wide.
RBT7 Close Out SALE $5.39 each |
|
Texture Brushes Dry texture brush is for use on hard greenware, while wet texture brush is intended for use on damp greenware or clay. Both are made with stainless steel wires, firmly set in a hardwood handle for a total length of 6½". |
|
|
|
Sculpter's Thumb Duplicates thumb and finger strokes for pushing, smoothing and covering up those finger marks. This compact 5" tool fits comfortably in most hands. |
|
|
Kemper RTC Rubber Texture Comb
|
|
|
Kemper S10 Serrated Stainless Steel Flexible Scraper 3.875" l x 1.875"w
|
|
|
PAD35 Wooden Paddle
|
|
|
FCR Clay Roller
|
|
|
K24 Clean Up Tool
|
|
|
MDT Multi Drill Tool
|
|
|
TRM Trim Knife
|
|
|
SBR Sabre Saw
|
|
|
TT1 Lg Teardrop Turning Tool
|
|
|
TT2 SM Teardrop Turning Tool
|
|
|
TT4 Right Hand Turning Tool
|
|
|
PRO Pro Needle Tool
|
|
|
COR Cut-Out Tool
|
|
|
DR6 Drill Tool
|
|
|
DR2 Drill Tool
|
 |
BSS Small Ball Stylus Tool .030" diameter ball
|
 |
BSL Large Ball Stylus Tool .114" diameter ball
|
 |
WS Wire Stylus Tool
Small wire loop set firmly into a
|
 |
W21 Wire Tool
Wire loop set firmly into a
|
 |
W22 Wire Tool
Wire loop set firmly into a
|
 |
W23 Wire Tool
Wire loop set firmly into a
|
 |
W24 Wire Tool
Wire loop set firmly into a
|
 |
W25 Wire Tool
Wire loop set firmly into a
|
 |
W26 Wire Tool
Wire loop set firmly into a
|
 |
210 Sculpture Tool
Heavy duty sculpting tool with a
|
 |
CUB Clean Up Brush
|
 |
K27 Sgraffito Tool
|
 |
R2 6" Ribbon Tool
|
 |
8R2 8" Ribbon Tool
|
 |
WLS Wireloop Sgraffito Tool
|
 |
SPD Salt & Pepper Drill
|
 |
GBC Glaze & Bisque Cutter
|
 |
SWZ Swizzle Stick Tool
|
 |
PNH Heavy- Duty Needle
|
 |
|
 |
Kemper Clay Wipe Out
Tools |
|
Spongette Tools
K33 7" List: $5.89 Our price $5.00 K33L 13" List $6.59 Our Price $5.60 |
|
|
SBT Spatter Brush
|
Sander SpongesThese Kemper sander sponges measure 4.5 inches in length. Use the 120 grit sander sponge for clay, the 1500 grit sander sponge for stone, porcelain, polymer clay, wood and more. Get the right grit for your next creative project! |
|
 |
SSM 120/ 180 Grit Sander Sponge |
 |
SSF 320/ 400 Grit Sander Sponge |
 ` |
SSSF 500/ 600 Grit Sander Sponge |
 |
SSUF 800/ 1000 Grit Sander Sponge |
|
|
SSMF 1200/ 1500 Grit Sander Sponge |
