STUDIO 4 PACKAGE: 2 L&L Easy-Fire e28Ts & Liberty Belle Kilns

Easy-Fire e28T Kiln Package

The 10.2 cu ft e28T kiln is the largest Easy-Fire, combining maximum capacity with ease of operation for high-volume studios. The Dynatrol digital controller fires the kiln automatically-- the 28" diameter, 27" depth and spring-assisted lid make it massive, yet easy to load and unload. This all-inclusive package includes the furniture kit for stacking work inside the kiln (details below), Vent-sure system to help keep your studio environment clean and safe, and shipping via freight carrier!

EACH HAS:

Furniture / Accessory Kit: Eight 26'' half shelves, six 1/2'' posts and four each: 1'', 2'', 4'', 6'', 8'' and 10'' square posts plus five pounds of Cone 10 kiln wash, dark viewing glasses and a pair of temperature resistant gloves for loading.

Energy, Time and Firing Costs: Typical heat up to Cone 6 at 240 volts with a 125 pound load and with Vent-Sure on at 240 Volt/single phase is 11 hours, 98 kW hours, $7.84 @ 8 cents per kW hour.

• Brick: 3" of premium select K23
• Exterior Size: 40'' wide by 41'' high by 50'' deep
• Recommended Floor Space: 60'' wide by 60'' deep
• Control: DynaTrol with Dynamic Zone Control, 4 preset programs, 6 user-defined programs
• Thermocouples: Two Heavy-duty 8 gauge with industrial ceramic protection tubes
• Hinge: Easy-Lift, Easy-Load Spring Hinge
• Stand: Full Support Aluminized stand
• Power Hook Up: Single phase only. Gets a 50 amp 6-50P cord

Liberty Belle Kiln Package

Energy Savings: The kiln when empty can reach Cone 10 in about 2 hours and use about 12.5 KWH (this would cost about $1.00 @ 8 cents per KWH. When fired with a heavy load of 55 pounds it took 23 KWH to go to Cone 6 on a Fast Glaze program - about $1.84).

Glazes, Brushes, and Accessories

Mayco's Stroke & Coat Wonderglaze is the premier product for decorating bisque. Simply apply Stroke & Coat, let dry, glaze & fire to produce a finish that is almost fool proof for any skill level. Easy to use, non-toxic, dinnerware safe.

Professional Glaze Tank and Dipping Station

• Large 18" x 24" Opening
• 18" Deep Tank- woven fiberglass construction
• Powerful 3/8" Mixing Motor
• 3/8" x 20" Stainless Steel Mixer
• 35" Tall Working Height, Work Standing Up
• Grid Rack For Piece Drying
• Heavy Duty Container
• Use Lid to Store Glaze Right Inside Tank
• 30 Gallon Capacity
• Extra Container for Mixer Storage
• Storage Area Under Tank
• Four Large Casters for Easy Moving
• Tongs For Dipping
• Plastic Gloves Included
• 5 Year Limited Warranty

Bisqueware Package

Your bisqueware will be the most profitable item for resale-- there is enough bisqueware here to net over $35,000 and recoup the entire initial investment on your studio!

Click here to see a sample inventory!

Contemporary Ceramic Studios Association Membership

You'll receive a membership to the Contemporary Ceramic Studio Association (CCSA) -- you'll get member's access to their comprehensive website, source guides, newsletters, and most importantly, a Studio Operations Manual that will cover all aspects of your studio business and help ensure its success!