Design A Custom Paint Your Own Pottery Store

STUDIO 3 PACKAGE: L&L Easy-Fire e23T & E23s Kilns

Easy-Fire e23T Kiln Package

KILN

Easy to move and set up All L&L easy-fi re kilns are made of easy-to-lift sections (with handles) which quickly assemble together. The element box and hinge come off without removing screws. All wires from the kiln to the panel are marked for easy hookup. These kilns can be moved through almost any doorway or up stairs by one or two people.

Furniture / Accessory Kit:
Two 21’’ by 3/4” full round shelves, four 21’’ half
shelves, six each 1/2’’, 1’’, 2’’, 4’’, 6’’ and 8’’ square
posts plus fi ve pounds of Cone 10 kiln wash,
dark viewing glasses, and a pair of temperature
resistant gloves for unloading. H-E-K23T/00

Energy, Time and Firing Costs: Typical heat up to cone 6 with a 85 pound load and with Vent-Sure on at 240 Volt/single phase is 6-1/2 hours, 58 kW hours, $4.64 @ 8 cents per kW hour.

Maximum Temp	2300 F
Shipping Weight	600 lbs
Amps @ 240v	47.9
Watts @ 240v	11500
Phase	1 or 3
Volts	208 or 240
Fuse Size	60 AMPS

Number of Sections: 3
Brick: 2.5" of premium select K23
Exterior Size: 32'' wide by 40'' high by 45'' deep
Recommended Floor Space: 54'' wide by 54'' deep
Control Panel Mount: Piggybacked on insulated terminal box
Control: DynaTrol with Dynamic Zone Control, 4 preset programs, 6 user-defined programs
Thermocouples: Two Heavy-duty 8 gauge with industrial ceramic protection tubes
Hinge: Easy-Lift, Easy-Load Spring Hinge
Stand: Full Support Aluminized stand
Power Hook Up: Single phase Gets a 50 amp 6-50P cord, 3 Phase Gets a 50 amp 15-50P cord

Easy-Fire e23S Kiln Package

The 4.7 cu ft e23S kiln is perfect for home studios with limited budgets or space considerations. The Dynatrol digital controller fires the kiln automatically-- the 23.5" diameter, 18" depth and spring-assisted lid make it easy to load and unload. This all-inclusive package includes the furniture kit for stacking work inside the kiln (details below), Vent-sure system to help keep your studio environment clean and safe, and shipping via freight carrier!

Furniture Kit Includes: One 21" full round shelf, four 21" half shelves, six each 1/2", 1", 2", 4", 6" and 8" square posts plus five pounds of Cone 10 kiln wash, dark viewing glasses and a pair of temperature resistant gloves for unloading.

Energy, Time and Firing Costs: Typical heat up to cone 6 with a 55 pound load and with Vent-Sure on at 240 Volt/single phase is 5-1/2 hours, 38 kW hours, $3.04 @ 8 cents per kW hour

E23S KILN

Maximum Temp	2350 F
Shipping Weight	365 lbs
Amps @ 240v	39.4
Watts @ 240v	9460
Phase	1
Volts	208 or 240
Fuse Size	50 AMPS

Brick: 2.5" of premium select K23
Exterior Size: 32'' wide by 31'' high by 45'' deep
Recommended Floor Space: 54'' wide by 54'' deep
Control: DynaTrol with Dynamic Zone Control, 4 preset programs, 6 user-defined programs
Thermocouples: Two Heavy-duty 8 gauge with industrial ceramic protection tubes
Hinge: Easy-Lift, Easy-Load Spring Hinge
Stand: Full Support Aluminized stand
Power Hook Up: Single phase only. Gets a 50 amp 6-50P cord

Glazes, Brushes, and Accessories

Mayco's Stroke & Coat Wonderglaze is the premier product for decorating bisque. Simply apply Stroke & Coat, let dry, glaze & fire to produce a finish that is almost fool proof for any skill level. Easy to use, non-toxic, dinnerware safe.

Studio 3- You get 48 pints of Mayco Stroke & Coat in a variety of best selling colors, two 5-Gallon pails of clear dipping glaze, 48 plastic palettes, 2 brush assortments (384 brushes), 1 Health & Safety bulletin, 2 Mayco books, 1 Ceramics 101 book, 12 detailer tips with bottles, 50 pre-cut everyday assortment sponges, an assortment of natural sponges (approximately 24), tongs, a Stroke & Coat color chip chart & an assortment of 72 stilts

Bisqueware Package

Total cost of bisqueware after discount	$7,921.00
Shipping & Handling charges	FREE
Total investment in bisqueware	$7,921.00
Resale value of bisqueware	$31,000 +
Total number of pieces	~2,750

Your bisqueware will be the most profitable item for resale-- there is enough bisqueware here to net nearly $31,000 and recoup the entire initial investment on your studio!

Click here to see a sample inventory!

Contemporary Ceramic Studios Association Membership

You'll receive a membership to the Contemporary Ceramic Studio Association (CCSA) -- you'll get member's access to their comprehensive website, source guides, newsletters, and most importantly, a Studio Operations Manual that will cover all aspects of your studio business and help ensure its success!

The Bottom Line

e23T & e23S Kiln Packages- Vents, Furniture + S&H

$5,118.95

Mayco Glazes, Brushes, Accessories + S&H:

$1,685.00

Total Bisqueware + S&H:

$7,921.00

CCSA Membership and Studio Guide:

$275.00

GRAND TOTAL:

$14,999.95

PURCHASE THIS STUDIO PACKAGE NOW!!!