Studio Packs Kilns Bisque Glazes Back To Clay-King.com

STUDIO 2 PACKAGE: L&L Easy-Fire e23T & Liberty Bell Kilns

Easy-Fire e23T Kiln Package

KILN

The 7.0 cu ft e23T kiln is a workhorse in your studio, combining larger capacity with ease of operation. The Dynatrol digital controller fires the kiln automatically-- the 23.5" diameter, 27" depth and spring-assisted lid make it easy to load and unload. This all-inclusive package includes the furniture kit for stacking work inside the kiln (details below), Vent-sure system to help keep your studio environment clean and safe, and shipping via freight carrier!

Furniture/Accessory Kit: Six 26'' half shelves, six ½'' posts and four each: 1'', 2'', 4'', 6'', 8'' and 10'' square posts plus five pounds of Cone 10 kiln wash, dark viewing glasses and a pair of temperature resistant gloves for loading.

Energy, Time and Firing Costs: Typical heat up to Cone 6 with a 85 pound load and with Vent-Sure on at 240 Volt/single phase is 6 hours, 52 kW hours, $4.16 @ 8 cents per kW hour.

Maximum Temp 2350 F
Shipping Weight 500 lbs
Amps @ 240v 47.9
Watts @ 240v 11500
Phase 1
Volts 208 or 240
Fuse Size 60 AMPS
  • Brick: 3" of premium select K23
  • Exterior Size: 40'' wide by 32'' high by 50'' deep
  • Recommended Floor Space: 60'' wide by 60'' deep
  • Control: DynaTrol with Dynamic Zone Control, 4 preset programs, 6 user-defined programs
  • Thermocouples: Two Heavy-duty 8 gauge with industrial ceramic protection tubes 
  • Hinge: Easy-Lift, Easy-Load Spring Hinge
  • Stand: Full Support Aluminized stand
  • Power Hook Up: Single phase only. Gets a 50 amp 6-50P cord
Liberty Belle Kiln Package
The 16.5" diameter x 18" high Liberty~Belle kiln meets the needs of studio owners who need a small kiln for 'rush' or custom orders or who need more flexibility than is possible with a single kiln. Digital controls fire the kiln automatically and complete easy-to-follow visual instructions are included. It has L&L's time-proven technology like ceramic element holders, industrial-grade element terminals, heavy-duty elements and corrosion resistant materials. Insulation is an energy saving 3'' brick. This all-inclusive package includes the furniture kit for stacking work inside the kiln (details below), Vent-sure system to help keep your studio environment clean and safe, and shipping via freight carrier!

LIBERTY BELL KILN

Shelf Kit Includes: One 15" full round shelf, four 15" half shelves, four each 1", 2", 4", and 6" posts plus 1 pound of cone 10 kiln wash

Energy Savings: The kiln when empty can reach Cone 10 in about 2 hours and use about 12.5 KWH (this would cost about $1.00 @ 8 cents per KWH. When fired with a heavy load of 55 pounds it took 23 KWH to go to Cone 6 on a Fast Glaze program - about $1.84).

Maximum Temp 2350 F
Shipping Weight 275 lbs
Amps @ 240v 24.0
Watts @ 240v 5760
Phase 1
Volts 208 or 240
Fuse Size 30 AMPS

 

Glazes, Brushes, and Accessories

Mayco's Stroke & Coat Wonderglaze is the premier product for decorating bisque. Simply apply Stroke & Coat, let dry, glaze & fire to produce a finish that is almost fool proof for any skill level. Easy to use, non-toxic, dinnerware safe.

Mayco Glazes

Studio 2- You get 36 pints of Mayco Stroke & Coat, a variation of best selling colors, 2 5-Gallon pails of clear dipping glaze, 36 plastic palettes, 1 brush assortment, 1 Health & Safety bulletin, 1 Mayco book, 1 Ceramics 101 book, 6 detailer tips with bottles, 25 pre-cut everyday assortment sponges, an assortment of natural sponges (approximately 12), tongs, a Stroke & Coat color chip chart & an assortment of 48 stilts

Bisqueware Package

Total cost of bisqueware after discount

$4,120.00

Shipping & Handling charges FREE
Total investment in bisqueware $4,120.00
Resale value of bisqueware $16,300 +
Total number of pieces ~1460

Your bisqueware will be the most profitable item for resale-- there is enough bisqueware here to net over $16,300 and recoup the entire initial investment on your studio!

Click here to see a sample inventory!

Contemporary Ceramic Studios Association Membership

You'll receive a membership to the Contemporary Ceramic Studio Association (CCSA) -- you'll get member's access to their comprehensive website, source guides, newsletters, and most importantly, a Studio Operations Manual that will cover all aspects of your studio business and help ensure its success!

The Bottom Line

e23T & Liberty Belle Kiln Package- Kiln, Vents, Furniture + S&H

$4,462.00

Mayco Glazes, Brushes, Accessories + S&H: $1142.95
Total Bisqueware + S&H: $4,120.00
CCSA Membership and Studio Guide: $275.00
GRAND TOTAL: $9,999.95

PURCHASE THIS STUDIO PACKAGE NOW!!!

Copyright 2007 clay-king.com 29307. Toll free (888)-838-3625