e28T Kiln Package-- Kiln, Furniture, Vent, & Shipping!

Energy, Time and Firing Costs: Typical heat up to Cone 6 at 240 volts with a 125 pound load and with Vent-Sure on at 240 Volt/single phase is 11 hours, 98 kW hours, $7.84 @ 8 cents per kW hour.

            *240 Volt version of kiln

The e28T kiln is the largest in the Easy-fire series and is ideal for high-volume studios-- its 10.2 cu ft volume provides maximum firing capacity while the spring-assisted lid makes it easy to load and unload. Many studios use this kiln in conjunction with a second, smaller kiln to optimize firing costs. The Dynatrol digital controller fires the kiln automatically so you can concentrate on your customers! This all-inclusive package includes the furniture kit for stacking work inside the kiln (details below), Vent-sure system to help keep your studio environment clean and safe, and shipping via freight carrier! It's everything you'll need for one low price!

Furniture/Accessory Kit:
Eight 26'' half shelves, six 1/2'' posts and four each: 1'', 2'', 4'', 6'', 8'' and 10'' square posts plus five pounds of Cone 10 kiln wash, dark viewing glasses and a pair of temperature resistant gloves for loading.

CLICK HERE FOR MORE INFORMATION ON THE VENT-SURE KILN VENT SYSTEM!!!

• Exterior Size: 40'' wide by 41'' high by 50'' deep
• Recommended Floor Space: 60'' wide by 60'' deep
• Control: DynaTrol with Dynamic Zone Control, 4 preset programs, 6 user-defined programs
• Thermocouples: Two Heavy-duty 8 gauge with industrial ceramic protection tubes
• Hinge: Easy-Lift, Easy-Load Spring Hinge
• Stand: Full Support Aluminized stand
• Power Hook Up: Single phase only. Gets a 50 amp 6-50P cord