e23T Kiln Package-- Kiln, Furniture, Vent, & Shipping!

Energy, Time and Firing Costs: Typical heat up to cone 6 with a 85 pound load and with Vent-Sure on at 240 Volt/single phase is 6½ hours, 58 kW hours, $4.64 @ 8 cents per kW hour.

            *240 Volt version of kiln

The e23T kiln is very popular in ceramics studios-- its 7.0 cu ft volume provides increased firing capacity without using as much floor space as wider models-- this kiln is often used in conjunction with a second kiln to optimize firing costs. The spring-assisted lid makes it easy to load and unload. The Dynatrol digital controller fires the kiln automatically so you can concentrate on your customers! This all-inclusive package includes the furniture kit for stacking work inside the kiln (details below), Vent-sure system to help keep your studio environment clean and safe, and shipping via freight carrier! It's everything you'll need for one low price!

Furniture/Accessory Kit:
Two 21'' full round shelves, three 21'' half shelves, six ½'' posts and four each: 1'', 2'', 4'', 6'', and 8'' square posts plus five pounds of cone 10 kiln wash, dark viewing glasses and a pair of temperature resistant gloves for unloading.

CLICK HERE FOR MORE INFORMATION ON THE VENT-SURE KILN VENT SYSTEM!!!

• Brick: 2.5" of premium select K23
• Exterior Size: 32'' wide by 40'' high by 45'' deep
• Recommended Floor Space: 54'' wide by 54'' deep
• Control: DynaTrol with Dynamic Zone Control, 4 preset programs, 6 user-defined programs
• Thermocouples: Two Heavy-duty 8 gauge with industrial ceramic protection tubes
• Hinge: Easy-Lift, Easy-Load Spring Hinge 
• Stand: Full Support Aluminized stand
• Power Hook Up: Single phase only. Gets a 50 amp 6-50P cord