
Energy, Time and Firing Costs:
Typical heat up to cone 6 with a 55 pound load and with Vent-Sure
on at 240 Volt/single phase is 5-1/2 hours, 38 kW hours, $3.04 @
8 cents per kW hour.
| Chamber
Width |
23.375" |
| Chamber
Height |
18" |
| Chamber
Volume |
4.7
Cu Ft. |
| Maximum
Cone |
10
(2350 F) |
| Breaker
Size |
50
AMPS |
| Amps |
39.4* |
| Watts |
9460* |
| Phase |
1 |
| Volts |
208
or 240 |
| Shipping
Weight |
365
lbs |
- *240
Volt version of kiln
-
|
|
The e23S kiln
is perfect on its own in studios with limited budgets or space considerations-
it's also great as a second kiln for accommodating large firings or
'rush' orders. The Dynatrol digital controller fires the kiln automatically--
the 18" depth and spring-assisted lid make it easy to load and
unload. This all-inclusive package includes the furniture kit for
stacking work inside the kiln (details below), Vent-sure system to
help keep your studio environment clean and safe, and shipping via
freight carrier! It's everything you'll need for one low price!
| List
Price $2,610.00 + S&H |
| Your
price: |
| $2,087.95
DELIVERED! |
Furniture Kit Includes: One 21" full round shelf,
four 21" half shelves, six each 1/2", 1", 2",
4", 6" and 8" square posts plus five pounds of Cone
10 kiln wash, dark viewing glasses and a pair of temperature resistant
gloves for unloading.
-
Brick: 2.5" of premium select K23
-
Exterior Size: 32'' wide by 31'' high by 45'' deep
-
Recommended Floor Space: 54'' wide by 54'' deep
-
Control: DynaTrol with Dynamic Zone Control, 4 preset programs,
6 user-defined programs
-
Thermocouples: Two Heavy-duty 8 gauge with industrial ceramic
protection tubes
-
Hinge: Easy-Lift, Easy-Load Spring Hinge
-
Stand: Full Support Aluminized stand
-
Power Hook Up: Single phase only. Gets a 50 amp 6-50P cord
|
Call toll free at 888.838.3625
with any questions on kilns, accessories, etc. or with orders!
|
|
|