Special #4

This Summer Special includes potters wheel and kiln and is great for pottery students, beginners and hobbyists.

Pottery Studio Pack-- Shimpo VL-Whisper, L&L e23s kiln, tools & clay!

The "Whisper" features a ½ hp, brushless DC motor and direct drive (no belt) system. The motor is electronically controlled and operated by a fixed foot pedal with hand lever, and the "Whisper" maintains desired speed under all load conditions. The steel body is extremely durable, and a 14" wheelhead and two-piece splashpan are included as standard features. It is reversible and can center up to 100lbs.

Its compact design saves space, and the "Whisper" comes with a two-year warranty. Three words describe this wheel: smooth, quiet, and powerful.

Dimensions: 20" x 21" x 20". Ship weight: 135 lbs.

Features	Benefits
Brushless DC Motor	Smooth, Quiet, Powerful, No Maintenance
Electronic Controller	Maintains Desired Speed Under All Load Conditions
Broad Speed Range	Allow Optimum Speed for Every Project
Reversibility	Accommodates Left and Right Hand Users
Built-In Breaker	Motor is Protected from Overload
Fixed Foot Pedal with Hand Lever	Compact Design Saves Space
Wheelhead Turns Freely at "0" RPM	Serves as a Banding Wheel
Two-Piece Splashpan w/ Built-In Table	Completes the Package
Two-Year Warranty	Peace of Mind

This wheel ships via UPS.

L & L Easy-Fire Model e23s Kiln

Number of Sections: 2
Brick: 2.5" of premium select K23 3" brick available
Exterior Size: 32'' wide by 31'' high by 45'' deep
Recommended Floor Space: 54'' wide by 54'' deep
Control Panel Mount: Piggybacked on insulated terminal box
Control: DynaTrol with Dynamic Zone Control, 4 preset programs, 6 user-defined programs
Thermocouples: Two Heavy-duty 8 gauge with industrial ceramic protection tubes
Hinge: Easy-Lift, Easy-Load Summer Hinge
Stand: Full Support Aluminized stand
Power Hook Up: Single phase only. Gets a 50 amp 6-50P cord

Energy, Time and Firing Costs: Typical heat up to cone 6 with a 55 pound load and with Vent-Sure on at 240 Volt/single phase is 5-1/2 hours, 38 kW hours, $3.04 @ 8 cents per kW hour.

Shelf Kit Includes: One 21" full round shelf, four 21" half shelves, six each 1/2", 1", 2", 4", 6" and 8" square posts plus five pounds of Cone 10 kiln wash, daVL viewing glasses and a pair of temperature resistant gloves for unloading.

This kiln ships via freight carrier.

You'll also get an 8-pc tool set and 25 lbs of clay-- get started!

8pc Tool