Paragon Vulcan Kiln

Buy the Paragon Vulcan Kiln Today for All of Your Creative Projects

Paragon Vulcan Kiln
Glass Crucible Kiln
 

 

The Vulcan heats approximately 50 pounds of glass to a molten state. Mix custom glass colors. Make huge glass figurines, paperweights, blown vessels, stringers, and much more. Pull your own neon tubing. Make glass castings.

Sidewalls are 4 ½" thick. The extra insulation and heavy 12-gauge elements are designed for the stress of very long heat soaks. The deluxe S-Type platinum thermocouple with ceramic protection tube is standard on all Vulcan kilns. This thermocouple far outlasts the standard K-Type.

The Vulcan has a separate bottom section with a row of 2 ½" high wall bricks, held in place with spring-twist locks. Should a crucible crack during firing and leak glass onto the kiln bottom, merely replace the damaged bottom section.

Optional Shelf Kit: C10-R (10" round x 1/2") shelf and the correct 1 ½" wide posts to support your crucibles

The reliable solid-state Sentry controller continually monitors the firing so you can spend your time productively without closely watching the kiln. (Please remember, however, to check the kiln during firing and to monitor it near the expected shutoff time.) The sealed touch pad keeps out dust and is easy to wipe clean.