paragon TNF-24 kiln

 

Shelf Kit: No Thanks Yes Please --Add $315

Voltage: 240 Single Phase 208 SIngle Phase

Brick: Standard 3-inch --Add $65

Orton Kiln Vent No Thanks Yes Please --Add $345

Shipping: Standard Shipping --Add $0.00 W/ Residential Delivery --Add $15.00 W/ Lift Gate Service --Add $50.00

Retail $2,370.00
 

Our Price $1,998.88 DELIVERED!

 

Shelf Kit: 8 C-22H 1/2 Shelves, 21"round x ""thick 1 1/2"wide Square Posts, 8 of each -
1", 2", 3", 4", 5", 6"lengths
1 lb. Bag Kiln Wash

During busy seasons when orders are backlogged, you will be grateful you own a dependable Paragon kiln such as the TNF-24. Studio owners call these kilns "real work horses."

Paragon studio kilns have withstood years of abuse in school environments. High school ceramics teachers fire these kilns unmercifully, without remorse. Yet the kilns keep going. People swear by them.

The 10-sided TNF-24 comes in standard 2 ""thick sidewalls and lid. The TNF-24 bottom is 3"thick. For porcelain or stoneware, order the S-23-3, rated to 2350"F. Since the TNF-24 studio kiln uses 2 ""wall brick, we recommend it for low-fire ware, not for porcelain and stoneware.

The massive lid is easy to lift with Paragon's patented "LiteLid,"which does away with cumbersome pulleys and cords and reduces lid weight to only several pounds of pressure. Most people can lift the lid with one hand. Unlike pulleys and weights, the LiteLid is self-contained on the kiln. No need to drill holes in the ceiling for pulleys. The LiteLid sharply reduces wear between the lid and top rim of firebrick. The truss and floating lid allow expansion of the lid. Ask competitors if their lid spring includes a truss and floating lid.

A heavy galvanized steel base covers the reversible brick bottom completely. It folds up under the stainless case on all sides to strengthen the firing chamber. This is one more assurance that your Paragon kiln is built to last.

The 24"wide stand for 10 & 12-sided kilns supports the brick bottom with framing that is 4 ""wide across the top of each side. The stand accommodates the Orton Vent Master. The stand is rock-steady, with 16-gauge frame and heavy 12-gauge legs.

If you move your TNF-24 kiln out of the way when not in use, order an optional deluxe kiln stand with steel casters.

Something to consider if you already own a 12-sided kiln: Why purchase a 10-sided kiln such as the TNF-24 when you produce enough ware to fill a 12-sided kiln"It is because some ware fires more efficiently in a 10-sided kiln. Example: 10- and 12-sided kilns both fire four 10"wide bowls per shelf. When you own both sizes of kilns, you can choose the most efficient kiln for each size of ware. The 10-sided kiln is a good choice for those whose production depends on short firing cycles. Since 10-sided kilns are smaller than 12-sided, they can heat and cool faster. The 10-sided shelves are lighter than the 12-sided, and easier to lift.

BEFORE PLACING YOUR ORDER- This kiln ships via freight carrier-- CLICK HERE for the freight delivery checklist!