• WALL MOUNTED VENT BLOWER
    The vent blower motor is mounted on the wall. This keeps the heat of the kiln away from the motor (for long motor life) and keeps the motor vibration away from the kiln (which can cause ware to move, damage to the kiln, and misfiring of cones on a Dawson Kiln Sitter).
  • VACUUM IS SAFER THAN PRESSURE
    The vent tubing is kept under vacuum instead of pressure (unlike competitive brands). This insures that any leak in the tubing does not blow noxious fumes into your room.
  • EXTERNAL VENTING IS BETTER
    External venting is safer and surer than venting to the inside of your kiln room with a filter.
  • LARGE CAPACITY
    The blower vents up to 130 CFM (cubic feet per minute). This will handle up to a 20 cubic foot kiln (and usually larger). More than one vent can be attached to a kiln. Only 1.37 amps.
  • SIX FOOT POWER CORD WITH ON/OFF SWITCH
    The blower motor features a 6 foot long 120 volt 15 amp power cord. An On/Off switch is located on the cord.
  • ADJUSTABLE VENT CONTROL
    A vacuum bypass on the kiln bypass/collection box adjusts the amount of venting from the system. Don't waste heat and energy by venting more than you need. Adjust vent to kiln size.
  • 15-FEET OF FLEXIBLE ALUMINUM DUCT
    15 feet of flexible expandable aluminum 3" diameter duct is included along with necessary hose clamps. Longer lengths or lengths of 3" stove pipe can be used as well. Length can be as great as 60 feet horizontal or vertical with up to three 90 degree bends.
  • PATENTED ORTON DOWNDRAFT TECHNOLOGY
    The VENT-SURE downdraft ventilation system is produced under license from The Edward Orton Jr Ceramic Foundation and is covered by US Patent Nos. 4,863,374 and 4,978,295. This technology produces better firing by promoting higher temperature uniformity in the kiln.

  • We suggest using one per every 20 cubic feet of kiln interior.