Clay-King.com - Home Checkout
| More

3D Potter Potterbot 9

3d Potter Potterbot 7

3D Potter

Potterbot 9

Our Price $4850.00
Call for Shipping Quote before ordering



Note: All 3D Potter Printers and accessories are drop shipped from the manufacturer.

The 3D Potterbot 9 is our most popular model ceramic 3D printer because of its ideal size and price range. It is our professional dedicated ceramic and paste 3D printer that is built rugged and ready for a production environment, universities and ceramic institues.

The 3DP 9 is designed to improve speed and acceleration. The design uses high-precision linear rails from IGUS, an X and Y axis drive system with precision timing belt, and integrated closed loop hybrid motors. This eliminates any need for machine adjustment and reduces maintenance. Our design utilizes traveling X & Y axis with stationary Z axis. The X-axis is allowed to travel freely on top of any flat surface. The Z axis and extruder use a reduction gearbox for faster and smoother prints.

The hard anodized linear rail with advanced plastic car bushings will give extended service life, even in harsh environments. By using timing belts we have decreased printing time by as much as 75% for small items. The closed-loop motors have on board circuitry to eliminate any missteps or inaccuracy, while increasing the precision substantially and most importantly increasing the acceleration speed.

The 9 uses our 2000 ml direct nozzle extruder. Because the extruder is stationary, the clay comes directly out of the nozzle without any hoses, complicated air compressors, or augers. In addition, we are able to print superior quality prints with less air bubbles, in less time, and at larger scales.

Extruder tubes can be easily loaded from any standard pug mill. You can load 5 tubes in less than 10 minutes, that is 60 pounds of clay! The tubes can also be loaded manually with clay purchased from your local ceramic supplier. Clean up is easy and can be accomplished between loading tubes in less than a couple of minutes.

Touch screen control center make the stand-alone operation of our 3D Potterbot effortless. A simple SD card is inserted with the G code to run your prints. You have complete control over the printer & extruder by being able to adjust the speeds and flows easily through the touch screen.

#D Potters Potterbot 7

What's Included
  • 3D Potterbot 9
  • Close Loop Stepper Motors on X, Y, Z
  • 2000 ml extruder, 2 tubes
  • 4 nozzles (standard sizes: 3.5, 4.13, 5, and 6.4 mm)
  • Parts Box: Alan key set, grease, Acme driver tool, tie wraps, extra screws
  • Power Supply, USB Cable
Specifications

Printer Envelope: X-17" (432mm)  Y-14" (356mm)  Z-19" (483mm)

Printer Size: W-29" L-31" H-34"

Operation Needed: W-47" L-35" H-78"

Bat Diameter (printer bed) 15" (381mm)

Height to the top of the extruder fully extended is 78" (1981mm)

Average Speed: 2.2" to 5.1"/s (55 to 130 mm/s)

Power Supply: Output - 24v 5-6 amps / Input - 110v-220v, 50-60 hz
(no 220v power plug supplied for customers outside of USA)

Power Cunsumption: 24v ~2 amps, ~50 watts

Main controller board running Smoothieware with Arm Processor Cortex M3 100-120 Mhz

Touchscreen includes - Full control Standalone function, input from SD card with the G-code. Recommended slicing programs Simpliy3D, Cura, or Repetier.

Contact Help and Links Shipping Terms Master Index